Use And Handling Of The Electric Tool; Service; Safety Instructions Specifi Cally For Jigsaws - Parkside PSTD 800 A1 Originalbetriebsanleitung

b) Wear personal protection equipment, and
always wear a pair of protective goggles.
GB
Wearing personal protective equipment, such
as a dust mask, non-slip safety shoes, protective
gloves, helmet or ear protectors (depending on
the type and use of the electric tool), reduces
the risk of injuries.
c) Avoid unintentional operation of the appli-
ance. Ensure that the electric tool is switched
off before you connect it to the power supply,
pick it up or carry it. Carrying the electric tool
with your fi nger on the ON/OFF switch or con-
necting the appliance to the mains supply whilst
it is switched on can lead to serious accidents.
d) Remove any adjusting tools or spanners before
switching on the appliance. A tool or wrench
attached to a rotating appliance component
can cause serious injuries.
e) Avoid adopting an unusual posture. Ensure you
are standing fi rmly and keep your balance
at all times. This gives you much better control
over the electric tool, especially in unforeseen
circumstances.
f) Wear suitable clothing. Do not wear loose
clothing or jewellery. Keep hair, clothing and
gloves away from moving parts. Loose clothing,
jewellery and long hair can be caught in moving
parts.
g) If dust extraction and collecting equipment
can be fi tted, ensure that it is attached and
used properly. The use of an extraction system
can reduce hazards caused by dust.

4. Use and handling of the electric tool

a) Do not overload the appliance. Use the
appropriate electric tool for the job at hand.
Using the correct electric tool will allow you to
work better and more safely within the specifi ed
performance range.
b) Never use an electric tool with a defective
switch. An electric tool that can no longer be
switched on or off is dangerous and must be
repaired.
4
c) Remove the plug from the socket before making
adjustments to the appliance, changing acces-
sories or putting the appliance into storage.
This precaution is intended to prevent you from
unintentionally starting the appliance.
d) Store unused electric tools out of the reach
of children Do not allow people who are not
familiar with the appliance or who have not
read these instructions to operate the appliance.
Electric tools are dangerous if used by people
who are inexperienced.
e) Look after electric tools with care. Check to
see whether moving parts are functioning cor-
rectly and are not jamming, whether parts are
broken or damaged and that the functioning
of the electric tool is not impaired. Arrange for
damaged components to be repaired before
using the appliance. Many accidents are caused
by poorly maintained electric tools.
f) Keep cutting tools sharp and clean. Carefully
maintained cutting tools with sharp cutting edges
jam less often and are easier to control.
g) Use the electric tool, accessories, insertion
tools, etc. in accordance with these instruc-
tions. Take heed of the operating conditions
and the activities to be performed. The use
of electric tools for purposes other than those
intended can result in dangerous situations.

5. Service

a) Your electric tool should only be repaired
by qualifi ed specialists using original spare
parts. This ensures that your electric tool
remains safe.
Safety instructions specifi cally for
jigsaws
■ Hold the electric tool by the insulated
handles when you are carrying out work
during which the electric tool may come
into contact with concealed power cables
or its own power cable. Contact with a live
cable may also cause metal parts of the appli-
ance to become live and lead to electric shock.
PSTD 800 A1