Thank you for buying this product, our company is sure
that you will be more than satisfied with the product's
performance.
WARNING: Important safety instructions. For the
safety of people it is important to follow these
instructions. Please keep these instructions. The
product is supplied with a "Warnings" leaflet and
an "Instruction booklet". These should both be read
carefully as they provide important information
about safety, installation, operation and mainte-
nance. This product complies with the recognised
technical standards and safety regulations. We declare
that this product is in conformity with the following
European Directives: /EEC and 2006/95/EEC (and sub-
sequent amendments).
1) GENERAL OUTLINE
Operator for roll-up doors, provided with electrical
limit switches which can be adjusted on opening and
on closing.
Available in two versions, reversible (WIND RMB 130B
200 - WIND RMB 170B 200) and irreversible (WIND RMB
130B 200EF) and (WIND RMB 170B 200EF), the latter
provided with electric brake.
For irreversible versions, the emergency manoeuvre
is carried out by means of a knob attached to a wire.
2) EMERGENCY RELEASE
The emergency release device makes it possible to
manoeuvre the roll-up door manually.
WIND RMB 130B 200 - WIND RMB 170B 200:
In the case of models without electric brake, simply
open the lock, if fitted, and then manually lift the roll-
up door, thereby forcing the gearmotor to a reversible
movement.
WIND RMB 130B 200EF/WIND RMB 170B 200EF:
When dealing with models featuring an electronic
brake, unscrew the two halves of the release knob
from each other (Fig.A Ref. 1b) or pull the lever (Fig.A
Ref.2b) to release the gearmotor's brake, thus enabling
the roller shutter to be opened manually. To restore
motorized operation, screw the knob back together
(Fig.A Ref. 1c) or reposition the lever inside (Fig.A Ref. 2c).
3) USE OF AUTOMATION
As automation can be remotely controlled and there-
fore not within sight, it is essential to frequently check
1b
USER'S MANUAL
that all safety devices are perfectly efficient.
WARNING! - When any operation malfunction is
found, and not resolved, disconnect the power supply
and request the assistance of a qualified technician
(installer). When the operator is out of service, activate
the emergency release device in order to allow the
roll-up door to be opened and closed manually.
It is recommended to keep children at a safe distance
from the automation field of action.
Do not leave radio transmitters or other control devices
within children's reach, in order to avoid any uninten-
tional operator activation.
Inspect the installation frequently to check for signs
of unbalance, wear or damage to cables or springs. Do
not use the operator if any repairs or adjustments are
considered necessary.
This application is not meant for use by people
(including children) with impaired mental, physical
or sensory capacities, or people who do not have
suitable knowledge, unless they are supervised or
have been instructed by people who are responsible
for their safety.
Do not deliberately hinder the door's movement and
do not attempt to open the door manually unless the
actuator has been released with the relevant release
knob.
The user must not make any attempt to work on or repair
the automation. Always contact qualified staff only.
these should be sorted out by type (electrical compo-
nents, copper, aluminium, plastic etc.).
The descriptions and illustrations contained in
the present manual are not binding. The Company
reserves the right to make any alterations deemed
appropriate for the technical, manufacturing and
commercial improvement of the product, while
leaving the essential product features unchanged,
at any time and without undertaking to update the
present publication.
Fig. A
1c
4) SCRAPPING
Materials must be disposed of in conformity with
the current regulations. In case of scrapping, the
automation devices do not entail any particular
risks or danger. In case of recovered materials,
2b
WIND RMB 130B/170B 200 - 350B 200-230 EF -
ENGLISH
2c
25