Adjusting The Set Pointers - WIKA TGS55 Betriebsanleitung

5. Commissioning, operation
Connecting cables must be suited to the ambient temperature range
■
of the application.
The connecting cables must also be suitable for the supplied cable
■
gland (for diameter range, see below).
Cable gland design
Seal the cable entry with the appropriate approved cable glands.
■
Install the connection cables securely.
■

5.4 Adjusting the set pointers

The adjustment of the set points is achieved using the adjustment lock in
the window with the aid of the adjustment key (included in delivery; found
in standard instruments on the side of the cable socket).
Adjustment lock
(to set the set pointer, place the adjustment key
here, press it in and set the required set point)
WIKA operating instructions models TGS55, TGS73 with 831 (Ex)
M20x1,5
Set pointer
Only use cable with a
diameter of 7 ... 13 mm
removable
adjustment key
EN
21