Replacement Of Batteries In Remote Controller - INVENTOR COOL Bedienungsanleitung

Replacement of batteries in remote controller

1. Apply some force on the rear of the remote controller where
marked with "
according to the arrows direction.
2. Replace two No.7 (AAA 1.5V) dry batteries and make sure
the positions of + and- polar are correct.
3. Re-position the battery cover.
Note:
● During operation, the remote controller should point towards the unit as the remote
controller signal receiver is located on the digital display panel.
● The maximum distance between the remote controller and the unit is at 8meters, clear of
any obstacles.
● There are many factors that may affect the signal such as fluorescent lamps or wireless
telephones. It is advised that the remote controller be near the unit during operation.
● When necessary replace with new batteries of the same type.
● When inactive for a prolonged period of time, the batteries should be removed.
● If the display of the remote controller becomes blurry or there is no display, replace
batteries.
" , and gently push out the battery cover
10
Battery
reinstall
remove
cover of battery box