DJI RONIN-S Kurzanleitung Seite 9

4. Balancing the Pan Axis
a. Grab the grip, tilt Ronin-S sideways, and check for movement along the pan axis.
b. Loosen the knob
still when rotating the pan axis 45° while lifting the grip.
c. Tighten the knob.
Activating Ronin-S
Make sure the camera is balanced before powering on Ronin-S. Do not turn on Ronin-S without a
balanced load, as doing so may damage the gimbal motors.
1. Press the power button once to turn on the grip, and then press and hold the gimbal power
button to turn on the gimbal.
2. Enable Bluetooth on your mobile device and launch the Ronin app. Select Ronin-S and input
the default Bluetooth password 12345678 once it's detected.
3. Make sure you are connected to the internet and follow the on-screen instructions to activate
Ronin-S for the first time.
4. After activation, double tap the gimbal power button to engage the motors before proceeding.
on the pan motor. Adjust the camera balance
1
9 41 AM
R O N I N
xxx@dji.com
Sign In Login
Sign Up Sign In
Forget Password？
1
2
100%
PRO
©
2018 DJI OSMO All Rights Reserved.
RONIN-S Quick Start Guide
until the camera stays
2
1 80%
Profile 1
Motor Parameters SmoothTrack
Control Settings
Setting
7