11.3 Remaining risk factors
It is important to ensure that each machine has remaining risks.
In the execution of all work (even the simplest) greatest attention is
required. A safe working depends on you!
Working with a machine always poses some risks that cannot be eliminated entirely:
Noise: Working for a long time can damage your hearing if you do not have a very good hearing
protection.
Risks of injury:
Be aware that the cutter might stall and lead you to fall.
Small objects might be caught by the machine and catapulted into the air.
The contact with the rotating moving cutter causes severe injuries! Protect especially your feet by
wearing reinforced security shoes.
Never get with your fingers or hands near the rotating moving cutter.
Do not touch the muffler or other machine components during operation – They become hot!
Risk to the hands or fingers:
machine must cool down. Otherwise, there is an acute risk of scalding!
Wear protective gloves to avoid injury
Make sure that the cover is securely mounted.
Be rotating parts (blades) mounted incorrectly, this can lead to serious accidents.
Check before starting work, the cutting blade for tight fit
These risk factors can be minimized through obeying all security and operation instructions, proper
machine maintenance, proficient and appropriate operation by persons with technical knowledge and
experience.
ZIPPER MASCHINEN GmbH
www.Zipper-Maschinen.at
ZI-DRM51
W A R N I N G
Access while it is working in the mowing apparatus. After the operation, the
SAFETY
26