11
SAFETY
11.1 Intended Use
The machine must only be used for its intended purpose! Any other use is deemed to be a case of
misuse. The machine is used for the maintenance of grass and lawns in the private sector.
To use the machine properly you must also observe and follow all safety regulations, the assembly
instructions, operating and maintenance instructions lay down in this manual.
All people who use and service the machine have to be acquainted with this manual and must be
informed about the machine's potential hazards.
It is also imperative to observe the accident prevention regulations in force in your area.
The same applies for the general rules of occupational health and safety.
Any manipulation of the machine or its parts is a misuse, in this case ZIPPER-Machines and its
sales partners cannot be made liable for ANY direct or indirect damage.
Even when the machine is used as prescribed it is still impossible to eliminate certain residual risk
factors.
Ambient conditions
The machine may be operated:
humidity
temperature
Prohibited use
The operation of the machine outside the stated technical limits described in
this manual is forbidden.
The use of the machine not according with the required dimensions is
forbidden.
The use of the machine not being suitable for the use of the machine and not
being certified is forbidden.
Any manipulation of the machine and parts is forbidden.
The use of the machine for any purposes other than described in 12.1 is
forbidden.
The unattended operation on the machine during the working process is
forbidden!
It is not allowed to leave the immediate work area during the work is being
performed.
11.2 Security instructions
Missing or non-readable security stickers have to be replaced immediately!
To avoid malfunction, machine defects and injuries, read the following security instructions!
The locally applicable laws and regulations may specify the minimum age of the operator and limit the
use of this machine!
ZIPPER MASCHINEN GmbH
www.Zipper-Maschinen.at
ZI-DRM51
Use only blades allowable for this machine!
Never use damaged blades!
WARNING
max. 90%
+5°С to +40°С (+41°F to +104°F)
SAFETY
24