Appendix: Computer Setup; Set Up Your Amplifier Using A Computer; Before You Begin; Computer Setup - Bose SOUNDTOUCH SA-5 Bedienungsanleitung

Set up your amplifier using a computer

You can set up your amplifier using a computer rather than a smartphone or tablet.

Before you begin

• Position your amplifier next to your computer.
• Make sure your computer is on your Wi-Fi network.
• Obtain a USB A to USB Micro B cable (not provided).
Notes:
• A USB A to USB Micro B cable is commonly used for charging mobile devices. You
can also purchase this at your local electronics store. If you don't have this cable,
contact Bose customer service.
• The USB connector on the back of your amplifier is for computer setup only. The
USB connector is not designed to charge smartphones, tablets, similar devices or
the amplifier itself.

Computer setup

During setup, the app prompts you to temporarily connect the USB cable from the
computer to your amplifier. Do not connect the USB cable until the app instructs you to
do so.
1. Plug the power cord into an AC (mains) power outlet.
2. On your computer, open a browser and go to:
global.Bose.com/Support/SA5
Tip: Use the computer where your music library is stored.
3. Download and run the SoundTouch® app.
The app guides you through setup.
4. After setup is complete, disconnect the USB cable from your computer and from
your amplifier. Move your amplifier to its permanent location.
A P P E N D I X : C O M P U T E R S E T U P
E N G L I S H - 3 1