Status Messages - Antari F-5D Bedienungsanleitung

It is recommended to run the machine on a monthly basis in order to achieve best
․
performance and output condition.
Excessive dust, liquid and dirt built up will degrade performance and cause
․
overheating.
Replacing the Fuse
Disconnect AC power before replacing fuse. Only replace fuse with same type
and rating.
Step 1: Disconnect power cord from supply.
Step 2: Use a flat-head screwdriver to release fuse holder.
Step 3: Replace fuse with exact same type and rating as indicated below.
Step 4: Reinsert fuse holder.
Breaker
100V = T6.3A 250V
110 – 120V = T7A 250V
220 – 240V = T4A 250V
Status of W-DMX connection
Symbol on the Liquid Crystal Display

Status Messages

Warming Up
●
◎
⊙
○
Machine heating up
Status of W-DMX connection
Transmitter assigned, DMX signal received
Transmitter assigned, No DMX signal
Transmitter link lost or linking to transmitter
Transmitter not assigned
10