Connecting An Audio Device Using Aux In; Software Upgrade - Samsung DA-F60 Bedienungsanleitung

f You may be required to enter a PIN code (password)
when connecting the Bluetooth device to the Wireless
Audio Portable. If the PIN code input window appears,
enter <0000>.
f The Wireless Audio Portable supports SBC data
(44.1kHz, 48kHz).
f The AVRCP feature is not supported.
f Connect only to a Bluetooth device that supports the
A2DP (AV) function.
f You cannot connect to a Bluetooth device that supports
only the HF (Hands Free) function.
f Only one Bluetooth device can be paired at a time.

connecting an audio deVice using auX in

This section explains how to connect the unit to an audio device.
This unit requires one audio analogue jack for connecting to an
audio device.
VOL
SERVICE
5V 500mA
MUT
E
FUN
C.
AUX IN
BAS S
DC 14V 2.5A
Audio Cable
Earphones
(not supplied)
jack
External device
FUNC.
Press the button to select AUX function.
f Before moving or installing this product, be sure to turn off
the power and disconnect the power cord.
4
English
using the soundshare Function
This section explains how to connect the Wireless Audio
Portable to Bluetooth compatible SAMSUNG TVs.
Connect
E
MUT
FUN C.
BASS
1. Turn on the Samsung TV and Wireless Audio Portable.
• Set 'Add New Device' to 'On' in the TV's 'SoundShare
Settings' menu. (Refer to the TV's user manual for details.)
FUNC.
2. Press the button to change the mode of the Wireless
Audio Portable to . A message asking whether to proceed
with Bluetooth pairing appears.
• The
blinks in the standby mode.
3. Select <Yes> on the TV screen. The Wireless Audio Portable
pairs with the TV.
• The
indicator blinks, and then stops blinking.
• The Wireless Audio Portable Bluetooth pairing is complete.
• If you want to cancel an existing pairing and pair the
Wireless Audio Portable to another TV, press the
button for 3 seconds with the unit in
f SoundShare is supported by some Samsung TVs
released after 2012. Check whether your TV supports
SoundShare before you begin.
f Optimal pairing distance is 1m or less.

soFtWare uPgrade

Samsung may offer upgrades for
the Wireless Audio Portable's
system i rmware in the future.
If an upgrade is offered, you can
upgrade the i rmware by
connecting a USB drive with the
i rmware upgrade stored on it to
the Service (USB) port on your
Wireless Audio Portable.
Please visit Samsung.com to receive more information about
downloading upgrades i les.
To upgrade after you have downloaded the i rmware, follow
these steps:
1. Turn on the product.
2. Insert a USB drive containing the i rmware upgrade into the
Service (USB) port on the back of the product.
FUNC.
3. Press the and
The update process starts.
• All LEDs indicators will blink during the update process.
4. The LEDs will turn off automatically after the update process
is complete.
• Do not disconnect the power or remove the USB drive
while upgrades are being applied.
• The product will turn off automatically after completing the
i rmware upgrade.
• When i rmware is upgraded, settings you have made will
FUNC.
return to their default (factory) settings. We recommend
mode.
you write down your settings so that you can easily reset
them after the upgrade.
• When the battery indicator LED is red, do not update the
product. Doing so could cause the product to malfunction.
f If the i rmware fails to upgrade, we recommend formatting
the USB drive in FAT16 and trying again.
f For upgrading purposes, do not format the USB drive in
NTFS format because it is not a supported i le system.
f Depending on the manufacturer, the USB may not be
supported.
SERVICE
5V 500mA
AUX IN
DC 14V 4A
SERVICE
5V 500mA
AUX IN
buttons for 5 seconds at the same time.