JVC BD-X200E Bedienungsanleitung Seite 70

Synchronous Recording
Editing Operations on the REMOTE CONTROL (9PIN MASTER/DV MASTER) Screen (continued)
4. Starting to record
REMOTE CONTROL SCREEN ( 9PIN MASTER )
EXIT
No. IN OUT
1
01 01 00 00 00 00 : : : :
2
: : : :
01 02 00 01 30 00
3 : : : :
01 03 00 02 30 00 00 03 30 00
TOTAL DURATION
CHAPTER MANUAL
ADJ
BITRATE 8.0 Mbps DISC REMAIN
TC SET EDL
CANCEL EDIT/END
TC
SOURCE TIMECODE
RECORDING
EDIT/END item
To suspend recording
While recording, press the "SPACE" key on the
keyboard, or select the EDIT/END item on the
screen, then press the "Enter" key and the
recording will be suspended.
Notes
● IN point editing accuracy is ± 5 frames.
OUT point and chapter point editing accuracy
is ± 20 frames.
● In the chapter auto mode, chapters are
created at fixed time intervals.
5. Saving event data
REMOTE CONTROL SCREEN ( 9PIN MASTER )
EXIT
No. IN OUT
1
01 01 00 00 00 00 : : : : :
2
01 02 00 01 30 00 : : : : :
3
01 03 00 02 30 00 : : : 00 03 30 00 : :
TOTAL DURATION
CHAPTER MANUAL
ADJ
BITRATE 8.0 Mbps DISC REMAIN
TC SET EDL
CANCEL EDIT/END
TC
SOURCE TIMECODE
EDL item
6. Finishing recording
REMOTE CONTROL SCREEN ( 9PIN MASTER )
EXIT
No. IN OUT
1
: : : :
01 01 00 00 00 00
2
01 02 00 01 30 00 : : : :
3
01 03 00 02 30 00 : : : 00 03 30 00 :
CHAPTER MANUAL TOTAL DURATION
ADJ
BITRATE 8.0 Mbps DISC REMAIN
TC SET EDL
CANCEL EDIT/END
TC
SOURCE TIMECODE
EXIT item
E-68
ACTION MENU
: : CHAPTER
: :
CHAPTER
: :
00
STOP
00h 03m 30s
030 min
FINALIZE
: : :
00 03 30 00
ACTION MENU
: CHAPTER
: CHAPTER
: 00
STOP
00h 03m 30s
030 min
FINALIZE
00 03 30 00 : : :
ACTION MENU
: : CHAPTER
: : CHAPTER
: : 00
STOP
00h 03m 30s
030 min
FINALIZE
00 03 30 00 : : :
FINALIZE item
q Press the "SPACE" key on the keyboard, or select the EDIT/END item on
the screen, then press the "Enter" key.
● The VCR goes to a position about 5 seconds before the edit start position
and starts playback.
● At the same time as the VCR reaches the edit start position this machine
will start recording.
While recording, "RECORDING" is displayed.
● When the position where a chapter is registered is reached a chapter
mark will be applied.
● The event that is being executed will be displayed at the ">" mark on
the left.
w When the event OUT point is reached, the following is carried out,
depending upon the ACTION item setting for the event.
When the OUT point of an event for which the ACTION item is set to
PAUSE is reached, the following operations are carried out.
● This machine enters the recording pause state.
● The VCR goes to a position about 5 seconds before the next start
edit point, and starts to playback.
● At the same time that the VCR reaches the edit start point this machine
starts recording.
When the ACTION item for the final event is set to PAUSE, editing
finishes when the OUT point of the final event is reached, and the
following operations are carried out.
● The VCR automatically stops.
● This machine automatically stops, and the chapter menu thumbnail
edit screen is displayed. (When the DVD MENU TYPE item of the
RECORDER (2/2) screen is set to TOP+MENU, and the EDIT MENU
item of the SYSTEM menu screen is set to ENABLE)
When the OUT point of an event for which the ACTION item is set to
STOP is reached, editing finished and the following operations are carried
out.
● The VCR automatically stops.
● This machine automatically stops, and the title close process is
executed. (The thumbnail edit screen is not displayed.)
Event data can be saved as an edit list (EDL) on the EDL MANAGER screen
of this machine.
Also, an edit list registered on the EDL manager screen can be read into the
event register list of the REMOTE CONTROL screen.
Select the EDL item on the screen, press the "Enter" key and the EDL
MANAGER screen will be displayed.
☞ Page 69 for details on how to use the EDL MANAGER screen.
To playback the recorded disc on another DVD player, select the FINALIZE
item, and press the "Enter" key.
Select the EXIT item on the screen, press the "Enter" key, and the REMOTE
CONTROL screen will disappear.
To remove a disc from this machine, press the OPEN/CLOSE button on
this machine.