Werbung
Soft Start
To start the pump after a protracted stop of the TwisTorr 84 FS, it's
recommended to enable the "Soft Start" function; this allows a better
grease distribution in the bearings.
The "Soft Start" mode is disabled by default.
To enable the "Soft Start" mode it must be activated by the suitable
software or Remote I/O command (see Controller Manual).
"Soft Start" frequency steps are the following: 450Hz, 1100Hz,
1200Hz, 1300Hz, 1350Hz or more details see Controller Manual.
TwisTorr 84 FS User Manual / 87-901-043-01(B)
Technical Information
Soft Start
303/336
17
Werbung
Kapitel
