Connecting The Camera - D-Link DCS-7513 Installationsanleitung

Connection with a PoE Switch
ƒ Connect the Ethernet cable to your PoE
switch or injector. The Ethernet cable will
provide the camera with both power and a
network connection.
If you have the optional cable harness, you can
also use the following connection method:
General Connection Using 12 V DC Power
Adapter (not included)
ƒ Connect the Ethernet cable to your network.
ƒ Connect your power adapter to the camera's
power connector, then plug in the power
adapter.
6

Connecting the Camera

D-Link DCS-7513 Quick Installation Guide