Inhaltsverzeichnis
Werbung
Shadowing
Shadowing is a learning method to repeat an
example immediately after it is heard. You can use
the shadowing function of this unit to repeat the A-B
repeat section (example) and a no-sound section
(practice). This is convenient for pronunciation or
listening practice for language learning.
• When the unit is not in the stop state, press
[STOP g/RETURN].
1
Press [MENU].
Press u, i to
2
select " " and
press [q OK] to
enter.
Press +, – to select "On" and press
3
[q OK] to enter.
The shadowing function turns on.
(The factory setting is "OFF".)
To exit the setting screen, press [STOP g/RETURN].
Select the file you want to play with shadowing
4
(
pages 10, 13) and press [q OK].
➜
●
You cannot set shadowing when the time between the start point (A) and finish point (B) is
approx. 2 seconds or less.
●
When only the start point (A) is set and playback continues until the end of the file, the end
becomes the finish point (B) and shadowing begins.
●
Shadowing by setting the range using 2 files is not possible.
Example
A-B repeat section
Press
5
[ERASE/A-B&].
The start point (A) is
set and "
" (lighting)
and " " (blinking) are
displayed.
Press [ERASE/A-B&]
6
at the finish point (B).
The indication changes to
"
" (lighting), shadowing
starts, and A-B repeat playback
and no-sound playback
repeats. The shadowing icon
lights on during A-B repeat
playback, and blinks during
no-sound playback.
Cancelling shadowing:
Press [ERASE/A-B&] again. (Shadowing can also
be cancelled with [STOP g/RETURN], u or i.)
Practice
No-sound section
Shadowing icon
21
21
Werbung
Inhaltsverzeichnis
