Choosing Your Video Source; Channel And Volume Buttons; Info Panel - LifeView FlyTV Platinum Benutzerhandbuch

The LifeView TVR
4.2

Choosing your video source

The buttons on the bottom of the interface allow you to choose your source.
Air TV: Use this to receive your TV signal through a broadcast antenna.
Cable TV: Use this to receive your TV signal via cable.
AV IN: Use this when an external device using composite video is connected to
the FlyTV Platinum.
S-Video: Use this when an external device using S-Video is connected to the
FlyTV Platinum.
FM Radio: Use this to receive FM Radio. (FM models only)
4.3

Channel and volume buttons

On the right-hand side of the interface you will find the
channel buttons; use them to change channels. With
the +/- buttons, located at the bottom of the channel
numbers panel, you can add or delete a tuned channel
from your Channel List. See sections 3.5.1 and 3.5.5.
You can also find the volume buttons here; click on
them to increase or decrease the volume. Click on the
speaker icon below it to mute the volume.
4.4

Info panel

Left of the channel buttons you will find the info panel. The top part of the info panel
shows you your current video source and the channel you are tuned in to. If you are in
●REC
record mode, the
The bottom part of the info panel shows the size of file you are recording, your volume
level, the current time, and how long you have been recording. Clicking anywhere on
the volume bar will set the volume to that level.
8
indicator will be lit.