Internal Setup And Connections; Adjust The Volume - Korg SP-170DX Bedienungsanleitung

Internal Setup and Connections

Figure 1
Cord hook
DC plug
Be careful not to
bend this part too
much when you
insert the power
AC adapter
cord.
Power cord for
the AC adapter
To AC
outlet
Figure 2
VOLUME
knob
Power LED
Power switch
Figure 3
PHONES jacks
Figure 4
1. Connecting the Power (Figure 1)
• Connect the supplied AC adapter to the power cord. Insert the DC plug end into the DC12V
jack on the rear panel of the unit. Next, plug the power cord into an AC outlet.
Pass the AC adapter cord through the cord hook so that the plug won't be removed from
the jack accidentally. When you unhook the cord, don't pull the cord with force.
Be sure to use the AC adapter that came with your unit. Using other AC adapters may
cause the unit to malfunction.
Be sure to plug the unit into an AC outlet of the appropriate voltage.
2. Turning the SP-170DX ON
• Press the power switch that's located on the left side of the top panel to turn the unit on. (Figure
2)
The power LED to the left of the music stand will light up. (Figure 2)
• Press the power switch again to turn the unit off.
The power LED will go dark.
The instrument will automatically power off when the keyboard is not played for 30 min-
To use it again, press the power button to turn on the power.
utes or more.

3. Adjust the volume

• Rotate the VOLUME knob that's located next to the power switch right toward "MAX" to
raise the volume level. Rotate it left toward "MIN" to lower the level. (Figure 2)
The VOLUME knob controls the output level of the built-in speakers and the headphones
jacks.
Using headphones
When you plug in headphones, the built-in speakers will be muted. This is useful when you
want to play the keyboard in the evening without bothering your family or your neighbors.
The SP-170DX features two headphone jacks so that two people can enjoy playing and lis-
tening.
• Insert the stereo headphone plug into one of the PHONES jacks on the rear panel. (Figure
3)
If your headphones feature a standard-to-mini adapter plug, be sure to hold the adapter
plug when you connect or disconnect the headphones.
To protect your hearing, do not listen to loud, high-volume sounds for a long period of
time through headphones.
Connecting audio components
You can use the PHONES jacks as line-out jacks to connect powered speakers or audio com-
ponents to the keyboard. For such connections, use commercially-available cables that are
appropriate for the components that you're using.
Before connecting audio components, make sure that you turn off the power to the unit
and the audio components. Otherwise, damage to the unit or other components may
occur.
Using the music stand
• Insert the legs of the supplied music stand into the dedicated groove that's located in the
middle of the top panel. (Figure 4)
3