Eneo VKC-1353-1/IR Montage- Und Betriebsanleitung Seite 62

9. INITIAL: Reset to factory default only in the IMAGE ADJ mode
• Select INITIAL using the UP or DOWN button and reset the IMAGE ADJ mode using the MENU button.
10. RETURN: Return to MAIN MENU
• Select RETURN using the UP or DOWN button and return to MENU using the MENU button.
5.1.7 GENERAL
Select GENERAL using the UP or DOWN button and press the MENU button to activate the GENERAL mode.
1. CAM ID: CAMERA ID (RS-485 Communication ID)
• Select CAM ID using the UP or DOWN button. You can select
between the range of 000~55 using the LEFT or RIGHT button.
NOTE: CAM ID does not reset after user setting.
2. ID DISPLAY (CAMERA ID DISPLAY)
• Select ID DISPLAY using the UP or DOWN button. You can select
between ON/OFF using the LEFT or RIGHT button.
() ON: To display the camera ID area on the screen
() OFF: Disable
6