3. White Balance; Auto Mode - Eneo VKC-13100IR12Z Montage- Und Betriebsanleitung

• Auto Mode

It automatically switches the settings needed for attaching or removing the IR Cut Filter.
With a set level of darkness, the IR Cut Filter is automatically disabled and the infrared
DAY&NIGHT
sensitivity is increased. With a level of brightness, the IR Cut Filter is automatically enabled.
• Ext-In Mode
It switches to Day mode when the input from D&N-IN Port is High and switches to Night
mode when it is low.
Select Day&Night
• Mode: Select Day&Night mode
DAY / NIGHT / AUTO / EXT
• Delay: Adjust the working time of the filter when Day&Night operated.
5/0/5/0/5/30/35/40/45/50/55/60 sec
• BURST: When you select BW, you can burst off/on
OFF/ON

6.2.3. WHITE BALANCE

Auto Mode
This mode computes the white balance value output using colour information from the entire screen.
It outputs the proper value using the colour temperature.
An infrared (IR) cut-filter can be disengaged
from the image path for increased sensitivity
in low light environment. The ICR will auto-
matically engage depending on the ambient
light, allowing the camera to be effective in
day/night environments.
4