Instructions Of Use; Maintenance And Cleaning; Environment Protection - Jata electro BT800 Bedienungsanleitung

• Make sure neither the appliance nor the cables are in direct
contact with hot surfaces or objects.
• Always place it on a flat surface.
• Always disconnect it from the mains when you do not use it and
before assembling / disassembling or when cleaning.
• Take all necessary precautions while handling the blade, as it is
very sharp.
• The cleaning and maintenance done by user can not be done by
children without any supervision.
• If the cable were to deteriorate it must be changed by an
Authorised Service Centre.

INSTRUCTIONS OF USE

• Place the jug (2) on the main body (3).
• To do it, place the jug up the main body making coincide the indication (І) of the jug with the indication of the
body . Next turn the jug to the position until the end to fix it correctly.
• Pour the food into the jug.
• Place the lid and close it as shown in Figure 1.
• WARNING: The blender can not work if the lid is not properly placed.
• Plug the appliance into the mains.
• Turn the speed selector (4) clockwise to the desired position (1 or 2). The blender will begin to work maintaining
the selected speed.
• It is advisable to begin at the lowest speed of the blender (position 1) to later raise the highest speed (position
2) if necessary. However, and depending on the texture of the food, you may use the highest speed from the
beginning.
• The "PULSE" position of the speed selector gives you the option to use the blender intermittently, as it will only
work while you keep the selector (4) turned to that position, and it will stop when it is released.
• The position "PULSE" is ideal to crush the ice. Turn the button and release the selector repeatedly for periods of
about 2 seconds to get crushed ice. For it, we suggest to use little ice cubes, or you can bit them before put them
on the blender, to avoid the "igloo" effect. This means that the crushed ice gets adhered to the blender walls, and
it impede that the other ice cubes arrive to the base to be crushed.
• Once you have finished, set the speed selector to its " 0" position and wait for the blade to stop turning completely
before removing the jug.

MAINTENANCE AND CLEANING

• Before you proceed to cleaning, make sure the appliance is unplugged from the mains.
• You can remove the blade set (5) by pulling it up, for further washing.
• The jar, the lid and the other components of the jar can be cleaned with soap and water, never in the dishwasher,
trying to rinse and dry them well.
• Clean the main body with a slightly damp cloth.
• Do not use abrasive or chemical products, such as metallic scourers, which may deteriorate the surfaces of the
appliance.

ENVIRONMENT PROTECTION

• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So you will help to the improvement of the environment.
9