Auping Kiruna Sami Gebrauchsanweisung Seite 22

Nothing works
Nothing works
Nothing works
Nothing works
Nothing works
The box spring fails to
respond to the infrared
remote control
The box spring fails to
respond to the infrared
remote control
GB20
_03JMR_4470 - BW.pdf - pag.20
Cause
No mains power supply.
Transformer defect.
Short circuit in motor.
Unidentified malfunction.
Power failure.
The batteries in the
handset are (almost)
empty.
Wrong infrared channel.
LET OP !!! Lage resolutie!
Search
Check if the current is
switched on at the
mains power supply, or
whether another
appliance has caused a
short circuit.
Unplug motors one by
one until the system
functions again.
All other domestic
electrical appliances
also fail to work.
Check whether the
battery symbol in the
handset display shows
empty.
Check that the switch
on the remote control
and the switch on the
control box are set to
the same channel.
Solution
Throw earth leakage
circuit breaker if
necessary.
Replace.
Replace faulty motor.
Remove the plug from
the wall socket and wait
10 seconds before
replacing and/or remove
the batteries from the
remote control for one
minute.
Engage emergency
horizontal adjuster.
Replace the batteries.
If not: switch one of the
switches to the correct
channel.
November 10, 2009