Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
REAR VIEW
2 1
-
7 DC Input
This is the power supply input for DC +5 V and +12 V.
Pin
Name
1
+12
2
G
3
G
4
+5
8 Host IDE Interface
This is a 40 pin I/O connector according to the ATA specifications.
9 Device Configuration Jumper
This is the jumper switch for selection of the drive use mode and supporting PC.
Short-circuit socket is attached for the setting
attached : on
Pin
Name
1 MASTER* on The drive is used in master mode.
2
SLAVE
3
CABLE
SELECT
4
5
* Only MASTER is ON at the time of shipping from the plant.
0 Audio Output
This is a connector for output of analog audio.
As a Molex 70553 type connecter is used, select a matching connection cable.
Pin
Name
1
L
2
G
3
G
4
R
- Digital Audio Output
This is a connector for output of digital audio signal.
Pin
Name
1
GND
2
Digital Out
8
<DRC1085>
En
4
1
5
1
0
9
Function
Power supply input for DC +12 V.
Ground.
Ground.
Power supply input for DC +5 V.
not attached : off
Function
on The drive is used in slave mode.
on Mode for drive setting by CABLE
SELECT of the IDE interface.
Reserved.
Reserved.
Function
Left channel audio output.
Ground.
Ground.
Right channel audio output.
Function
Ground.
Digital audio signal output.
39
40
8
A HARDWARE TOUR
1
2
4
1
Fig. 2
7
Werbung
Inhaltsverzeichnis
