Preliminary Operations; Filling The Detergent Tank; Data Plate - IPC H 1811Pi Bedienungsanleitung

PRELIMINARY OPERATIONS

UNPACKING
After unpacking, ensure that the cleaner is undamaged.
If in doubt, do not use the machine.
Contact your dealer.
Packaging (bags, boxes, nails, etc) is potentially dangerous and
should be kept out of reach of children. It should be disposed of
or retained in respect of national environmental legislation.
FITTING THE SEPARATE PARTS OF THE MACHINE
All the fundamental parts and safety devices of the machine are
assembled by the manufacturer.
For reasons of packing and transport, some secondary cleaner
parts are supplied separately.
The user must fit these parts as explained in the instructions
supplied in each assembly kit.

DATA PLATE:

The data plate bearing the
main technical characteristics
of your cleaner is located on
the trolley and is always visible
(fig. 1).
!
When buying your cleaner, ensure that it has an identi-
fication plate. If there is no plate, inform the manufacturer
and/or the dealer immediately. Machines without a plate
must not be used and the manufacturer declines all re-
sponsibility for them. Products without a plate must be
considered anonymous and potentially dangerous.
English
FILLING THE DETERGENT
TANK
! Warning
From the range of recommen-
ded products, choose the one
most suited to the washing job
to be done (fig. 2) and dilute
it with water according to the
instructions on the pack.
Fill the detergent tank with
the diluted product .
Ask your dealer for the catalogue of the detergents that can be
used depending on the type of washing job to be done and the
type of surface to be treated.
After using a detergent, the detergent intake circuit must be
flushed out with clean water.
FIG. 1
- 17 -
FIG. 2