Cassette Recorder - Philips AZ 2010 Bedienungsanleitung

AZ 2010 /00 10
page

CASSETTE RECORDER

PLAYING A CASSETTE
1. Set the source selector to TAPE.
2. Press STOP•OPEN 9 / to open the cassette holder and
insert a cassette.
3. Close the cassette holder.
4. Press PLAY 1 to start playback.
5. Adjust the sound using the VOLUME, INCREDIBLE
SURROUND and BASS controls.
6. To interrupt playback press PAUSE ;. To resume, press the
key again.
7. By pressing 5 or 6,fast winding of the tape is possible in
both directions.To stop fast winding, press STOP•OPEN 9 /.
8. To stop the tape, press STOP•OPEN 9 /.
– The keys are automatically released at the end of the tape,
except if PAUSE ; has been activated.
9. With the source selector in OFF/ TAPE position, the set is
switched off when all the cassette keys are released.
GENERAL INFORMATION ON RECORDING
• Recording is permissible insofar as copyright or other rights
of third parties are not infringed.
• This deck is not suitable for recording on CHROME (IEC
METAL (IEC IV) type cassettes. For recording you should use
NORMAL type cassettes (IEC I) on which the tabs have not
been broken.
• The recording level is set automatically. Altering the
VOLUME, INCREDIBLE SURROUND and BASS controls
will not affect the recording in progress.
• At the very beginning and end of the tape, no recording will
take place during the 7 seconds, when the leader tape
passes the recorder heads.
• To protect a tape from accidental erasure have the tape in
front of you and break out the left tab. Recording on this side
is no longer possible. To record over this side again, cover
the tabs with a piece of adhesive tape.
10
RECORDING
II) or
1