Burner Start-Up Cycle - Riello PRESS 140 T/N Montage- Und Bedienungsanleitung
Heizölbrenner
Vorschau ausblenden
Andere Handbücher für PRESS 140 T/N:
- Montage- und bedienungsanleitung (60 Seiten)
Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.7
BURNER START-UP CYCLE
Normal
Thermostat
Motor
Ignition transformer
Pre-purge
st
1
flame valve
nd
2
flame valve
rd
3
flame valve
Lock-out lamp
(t
)
Factory setting: 20 s.
x
This time determines the heavy oil tempera-
ture at ignition. It can be adjusted, accord-
ing to the fuel's viscosity, by the timer 22)
(Fig. 1).
The adjacent diagram shows the suggest-
ed settings.
t
max = 60 s
x
Motor lock-out
It is caused by the over load relay when overload
occurs or no current supply.
Re-set: push button 7) and 10) (fig. 1).
NB.: Periodically clean the filter of the pre-heater
tank.
4.8
THREE STAGE OPERATION
rd
3
stage
max.
nd
2
stage
st
1
stage
0
2915842
Lock-out because no ignition
11 GB
D2848
D3211
Viscosity at 50°C (°E)
D2749
Werbung
Kapitel
Inhaltsverzeichnis
