Backlight; Maintenance; Battery Replacement - Bresser 7002535 Bedienungsanleitung

High / Low
Alert on
7 Press any key on the front side to save alert on /off status and back to normal mode, or it will
automatically back to normal mode after 30 seconds without pressing any key
TO SILENCE THE ALERT ALARM
Press [ ALARM / SNOOZE ] key to silence the alert alarm or let the alarm automatically turn off after 2
minutes
NOTE:
- Once the alert is triggered, the alarm will sound for 2 minutes and the related alert icon and readings will
fl ash.
- If the alert alarm is automatically off after 2 minutes, the alert icon and readings will still keep fl ash until
the weather reading is out of the alert range
- The weather alert will sound again when the weather readings falls into the alert range again

BACKLIGHT

The main unit backlight can be adjust, using the [ HI / LO / AUTO ] sliding switch to select the appropriate
brightness:
- Slide to the [ HI ] position for the brighter backlight
- Slide to the [ LO ] position for the dimmer backlight
- Slide to the [ AUTO ] position for the auto adjust backlight that according to environment light level

MAINTENANCE

BATTERY REPLACEMENT

If the low battery indicator "
or CH section, it indicates that the current channel
wireless or 3-in-1 weather sensor battery power is
low You should replace all the batteries in the current
channel sensor at once
Alert on
" displayed in OUT
Alert off
24
Alert off