Novus J-172 A Bedienungsanleitung Seite 11

7. List of NOVUS stapling guns J-171 and J-172 A with the relevant fasteners
and the possible rate of shots
Impacts
Fasteners
Staples 4/18
4/23
4/26
4/30
Nails J 16
J 19
J 25
J 30
* When using these nails, select maximum power of impact!
8. Maintenance of the apparatus
Clean the magazine space of dust and other residues
from time to time. It is recommended to put a drop of oil
on the impact blade now and then.
A hint for the expert:
If you should mainly use nails, a touch with a file reshar-
pens the blade edges.
For this purpose:
a) Pull out the plug
b) Push a rod at least 150 mm long through the bore at
the upper head end. Invert the apparatus and place on
the rod. The blade is forced out of the staple outlet by
a slight counterpressure!
c) Sharpen the rounded edges slightly with a file.
9. Clearance of faults
In the event of malfunctions caused by jammed staples
or nails proceed as follows:
a) Pull out the mains plug.
b) Take off pusher (see I) and empty magazine
space.
c) Release front plate toggle-type fastener, take off front
plate and remove jammed staples or nails (see III).
Attention: For all other malfunctions please return to
stockist!
10. Guarantee
NOVUS electric stapling guns are high-precision tools.
We guarantee them for 2 years subject to appropri-
ate handling and use of genuine NOVUS staples and
genuine NOVUS nails. In case of any guarantee claim a
voucher showing the purchase date (for example cou-
pon, invoice, supply note) has to be enclosed with the
consignment. Modifications to the machines will cause
expiration of any guarantee claims.
GB
NOVUS J-171
1
2 and more
X
X
X
X
X
X
X
X
X
X
X
X
–
–
–
X
11. Technical data
Body: High quality, impact resistant
plastic casing
Dimensions: 243 mm high, 277 mm long,
58 mm wide
Weight: 1690 g
Metal parts: bronzed
Loading system: Rear loader
Staple outlet: At the front of the staplers through
nose piece of 14 mm length
Capacity: 125 NOVUS Staples 4/18 to 4/30;
116 NOVUS Nails J 16 to J 19
and J 25 to J 30 respectively
Electric pulse
generator: Housed in stapler handle, radio
screened
Supply line: Cable 3.5 m long, 2-core
(2x1 mm
Voltage: 230 volts a.c. (50 Hz)
Mains fuse: min. 10 amps, medium-slow
Short-time service: J-171:
J-172 A: depending on operation:
Single strike
Multiple strike
Rate of impulses: max. 20 shots/min.
Sound emission: Typical A-weighted single event
sound power level
L
pAmax, 1s, 1m
single event emission sound
pressure level at work station:
L
pAmax, 1s, 1m
(EN ISO 4871, DIN EN 12549)
Vibration: Typically weighted vibration
acceleration: 4.9 m/s
(ISO/WD 8662-11, DIN-NALS C 7.4)
12. Hint if lengthening cable is used
The nameplate rating refers to the installation of electric
supply lines conforming to standards. The power of
the apparatus accordingly depends on the length of
the supply line used and its cross-section. To avoid a
distinct decrease of performance, it is recommended to
use, if necessary, a lengthening cable of at least 1.5 mm
cross-section and maximum 10 m length.
NOVUS J-172 A
automatic
X
X
X
X
X
X*
X*
X
2
)
S2 30 Min.
S2 30 min.
S2 5 min.
= 80 dB
= 85 dB
2
2