Kingston Technology DataTraveler 2000 Bedienungsanleitung Seite 14

5. Click OK to continue with formatting the drive.
Warning: This procedure will erase all data stored on the drive.
6. The computer will finish formatting the drive and confirm that formatting has been
completed. While the DT2000 is formatting, the
Once finished, the
If the formatting wizard does not appear, follow the procedure below:
1. Right-click My Computer or Computer and then click Manage.
2. In the Computer Management window under the Disk Management tab, the DT2000 is
recognised as a removable device in raw format.
Document No. 480ADT2000.A00
Blue LED becomes solid and your DT2000 is ready for use.
DT2000
Blue LED will flash.
Page 13 of 17