Herunterladen Inhalt Inhalt Diese Seite drucken

How To Set The Timeout Lock Mode; How To Disable The Timeout Lock Mode - Kingston Technology DataTraveler 2000 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für DataTraveler 2000:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 36

8. How to set the Timeout Lock Mode

To protect against unauthorised access when the DT2000 is connected to a host and
unattended, the DT2000 can be set to lock automatically after a pre-set amount of time.
In its default state, the DT2000 Timeout Lock feature is turned off. The Timeout Lock feature
can be set to activate (lock) anywhere between 1 and 99 minutes.
To set the Timeout Lock, follow steps in the table below.
Instructions
1. Unlock the DT2000 with the User PIN
2. Enable Options by pressing the KEY 3
button times (triple-click)
3. Within 10 seconds, enter the number 8
(tuv) followed by the number 5 (jkl)
button - (85)
\
4. Press KEY button once
5. Within 10 seconds, enter the length of
User Timeout in 2 digits:
00 = 0 minutes (default)
01 = 1 minute
99 = 99 minutes, etc.
6. Press the KEY button once

9. How to disable the Timeout Lock Mode

To disable the Timeout Lock, follow steps in the table below.
Instructions
1. Unlock the DT2000 with the User PIN
2. Enable Options by pressing the KEY 3
times (triple-click)
3. Within 10 seconds, enter the number 8 (tuv)
followed by the number 5 (jkl) button - (85)
4. Press KEY button once
5. Within 10 seconds, enter the number 0
button twice (double-click) (zero zero) - (00)
6. Press the KEY button once
Document No. 480ADT2000.A00
LED
LED Status
Red
solid LED changes to
indicating successful User PIN entry
Green
and
Blue
awaiting new instructions in OPTIONS Mode
Green
and
Blue
together
Blinking
Green
Green
LED continues to blink
Green
solid LED - Timeout Lock has been
enabled
LED
LED Status
Red
solid LED changes to
indicating successful User PIN entry
Green
and
awaiting new instructions in OPTIONS
Mode
Green
and
together
Blinking
Green
LED continues to blink
Green
solid LED - Timeout Lock has been
disabled
DT2000
Green
solid LED
LEDs blink together –
LEDs continue to blink
LED
Green
Blue
LEDs blink together –
Blue
LEDs continue to blink
Green
LED
solid LED
Page 9 of 17

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis