Inhaltsverzeichnis
Werbung
Projecting
This section describes how to operate the projector to view the picture from the equipment
connected to the projector. It also describes how to adjust the quality of the picture to suit your taste.
Projecting the Picture on the Screen
Example: To view the picture
from the video
equipment connected
to the VIDEO INPUT
connector.
To view the picture from
Video equipment connected to the VIDEO INPUT connector
Video equipment connected to the S VIDEO INPUT connector
RGB/component equipment connected to the INPUT A connector
Component equipment connected to the Y P
Equipment connected to the HDMI 1 connector
Equipment connected to the HDMI 2 connector
* Set the "Input-A Signal Sel." setting in the Setup
you set it to "Auto," and cannot display the picture properly, select an appropriate signal
according to the input signal. (1 pages 51, 57)
Tips
• When "Auto Input Search" is set to "On" in the Function
effective signals are displayed in the input palette.
• When "Status" is set to "Off" in the Setup
the INPUT button to switch between input terminals in sequence.
• When the "Control for HDMI" is set to "On" in the Function
effective signals is automatically displayed, synchronizing with the operation of the equipment
connected to HDMI 1 or HDMI 2 input of the projector. (Only when the connected equipment
supports Control for HDMI compatible.)
28
1
Power on both the projector and
the equipment connected to the
projector.
2
Press INPUT to display the input
palette on the screen.
3
Select the equipment from
which you want to display
images.
Press INPUT repeatedly or press M/m/
(enter) to select the equipment
from which to project.
/C
P
/C
connector
B
B
R
R
menu according to the signal input. When
menu, only input terminals with
menu, the input palette does not appear. Press of
menu, the input terminal with
Press INPUT to display
Video
S-Video
Input-A*
Component
HDMI 1
HDMI 2
Werbung
Inhaltsverzeichnis
