Inhaltsverzeichnis
Werbung
Playing back
Settings before playback
Player Setup
fig.recording-1.eps
1
Press the R-4's [SYSTEM] button.
The system menu screen appears in the display.
fig.player-setup2.eps
2
Use the [CURSOR] buttons to choose 2 Playing Setup, and
press the [ENTER] button.
The Recording Setup screen appears.
3
Use the [SCRUB/VALUE] dial to choose the Play Mode value.
* The setting is applied as soon as you select it. You don't need to press
the [ENTER] button.
Make settings for the following items as well.
Menu
Play Mode
Repeat
X2 Play
* For more about system settings, refer to "System settings" (p. 60).
36
Player Setup
Playback method
settings
Selects the playback mode.
Single
Only the selected project will play.
The projects in the folder containing the currently selected project will
Sequential
play consecutively.
Selects whether playback will repeat.
If Play Mode is Single, only that project will play repeatedly. If it is
OFF, ON
Sequential, the projects in the folder containing the currently select-
ed project will play consecutively, and then the projects in the same
folder will again play consecutively from the beginning.
This enables/disables the function that provides double-speed play-
back when you press the [PLAY] button a second time during play-
back (i.e., when you press [PLAY] twice).
OFF, ON
The indication PLAY X2 will appear in the lower part of the display.
Normal playback will resume when you press the [PLAY] button
once again.
Werbung
Kapitel
Inhaltsverzeichnis
