Stopwatch Feature; Lap Time Measurement; Speed Setting; Adjusting The Stopwatch Hands - Auriol 2-LD4457 Bedienungs- Und Sicherheitshinweise

Do not set the date between 9:00 pm and 1:00
am as this can cause damage to the movement.

Stopwatch feature

Press button A to start the stopwatch- press Button A again
to stop the stopwatch. You can now read the stopped time.
Press Button B to reset the hands to the "60" (12 o'clock
position).
The stopwatch can measure a time span of up to 60
minutes.

Lap time measurement

Press button A to start the stopwatch- press button B to stop
the stopwatch and read the lap time, the stopwatch will
continue to count internally. Press button B again to show
the running stopwatch time. This process can be repeated
as often as desired. Press A to stop the stopwatch and read
the stopped time.

Speed setting

When setting press and hold A or B to use the speed setting
feature.

Adjusting the stopwatch hands

If the small stopwatch hands are not exactly in the "60" (12
o'clock position) they must be adjusted manually. Carefully
pull the crown out to the stop. Repeatedly press button A to
set the hands counter-clockwise to "60" (12 o'clock
position). Repeatedly press button B to set the hands
clockwise to "60" (12 o'clock position). Press the crown
back to the initial position.

Water resistance

Water resistant up to 10 bar. The bar value specifies the
atmospheric overpressure which is applied during testing
(DIN 8310).
 - 31 -