Operating Tips; Recommended Maintenance Schedule(S); Daily Care - Toro 51452 Bedienungsanleitung

Figure 10
After changing the setting, advance the line by tapping the spool
on the ground.
Maintenance

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
Before each use or daily

Daily Care

After each use of the trimmer, complete the following:
•
Wipe the trimmer clean with a damp cloth. Do not hose the
trimmer down or submerge it in water.
•
Wipe or scrape clean the cutting head area any time there
is an accumulation of debris.
•
Check and tighten all fasteners. If any part is damaged or
lost, repair or replace it.
•
Brush debris away from air intake vents on the back of the
shaft to prevent the motor from overheating.
Maintenance Procedure
• Clean the trimmer, especially the air intake vents
• Check the trimmer for damage and tighten all fasteners.

Operating Tips

To reduce line wear and improve trimming performance, use the
following techniques when trimming:
•
Remove any wire, rope or string-like matter which could
become entangled in the rotating line from the trimming area.
•
Trim only when the grass and weeds are dry.
•
Slowly move the trimmer in and out of the area being cut
(Figure 11).
Figure 11
•
Cut grass in excess of eight inches tall or weeds from the top
to the bottom in small increments.
•
Do not force the trimmer. Allow the very tip of the line
to do the cutting.
5