Hach NA5600 sc Na+ Betriebsanleitung Seite 17

Option
OFF DELAY
ON DELAY
Figure 6 Feeder control function
1 Deadband (Phase = Low)
2 Deadband (Phase = High)
3 Setpoint
Description
Sets a delay time before the relay is set to off.
Sets a delay time before the relay is set to on.
4 OFF delay (phase set high)
5 ON delay (phase set low)
6 Time (x-axis)
7 ON delay (phase set high)
8 OFF delay (phase set low)
9 Source (y-axis)
English 17