Auping Ultimate Climate Gebrauchsanweisung Seite 35

5.2.2 Manual body zone heating control
P
fig. 19
C
G
fig. 20
Setting the heating level
Set the heating level with the – and + buttons
(C and D).
The pilot lights at the bottom indicate the set
heating level.
2232 BinnenW.pdf - pag.33
start end now
P
LET OP !!! Lage resolutie!
5.2.3 Manual drying
P
D
Press button (E)
You must keep the pushbutton pressed down
for 3 seconds until the
pushbutton is on.
The body zone (H) will be heated at the highest
setting for a period of 2 hours and forty-five
minutes. The drying cycle stops automatically.
You can stop the drying process sooner by
again pressing the pushbutton
The drying function is explicitly NOT intended
as a bed warming or heating function. During
the drying function, you must NOT lie down or
sleep on the mattress.
E
start end now
P
H
after you get up.
the red light of the
fig. 21
fig. 22
.
GB33
August 11, 2006