Other Operations; Placing The Child In The Child Car Seat And Adjusting The Safety Harness; Use As Baby Bouncing Chair; Use With The Stroller - Chicco Oasys 0+ UP Bedienungsanleitung

rry on the back of the child car seat's backrest
(Fig. 16) WARNING! When travelling by car,
e's this diagonal safety belt must ALWAYS be
der threaded through this slot.
4. Pull the belt as tightly as possible, without
en leaving any slack and making sure it is
he not twisted.
gh 5. Turn the carry handle to position A (Fig. 17).
tly To remove the child car seat:
1. Release the car safety belt by pressing
ear the buckle.
r it 2. Bring the carry handle into the position
B (vertical).
tly 3. Unthread the belt through the diagonal
nd and horizontal slots.

3. OTHER OPERATIONS

ad
he
3.1 PLACING THE CHILD IN THE CHILD
ig.
CAR SEAT AND ADJUSTING THE
his
SAFETY HARNESS
be
To adjust the harness straps, proceed as follows:
out 1. Pressing the adjustment button (Fig. 2 - I)
t is and pull the child car seat harness straps
to loosen them (Fig. 18).
14). 2. Press the red button (Fig. 19A) to open
at, the buckle and keep the harness straps
t is spread apart (Fig. 19B).
gth 3. Place the baby on the seat. WARNING! The
ed. harness straps must always be adjusted
her to adapt to the child's growth phase. Be-
s. fore installing the child car seat inside the
he vehicle, adjust the harness straps to the
right height. To adjust them correctly, the
he harness straps must come out from the
g it backrest at the height of the child's shoul-
ders (Fig. 20). The headrest and straps can
on be adjusted simultaneously in height to
6 different positions using button Q (Fig.
ed 4-A) to follow your child's growth.
4. Overlap the two ends of the harness
straps, insert them together inside the
buckle until you hear them clicking (Fig.
se, 21) WARNING! Never insert just one end
of the harness into the buckle and do not
ed insert them one at a time. Press button Q
to adjust the straps.
n it 5. Tighten the child car seat's safety harness
ori- by pulling the adjustment strap (Fig. 22).
he WARNING! The booster cushion guarantees
15). the correct support and the ideal position
nd for the neck and back of babies from when
(O) they are born until they weigh about 6 kg.

3.2 USE AS BABY BOUNCING CHAIR

When the child car seat is not used in a car,
it can be used as a baby bouncing chair.
Place the child car seat only on stable hori-
zontal surfaces.
WARNING! Before carrying the child car seat,
always move the carry handle to position
B (vertical).
WARNING! Never leave your child unat-
tended.
WARNING! Always use the restraint system.
WARNING! Using the child car seat on raised
surfaces such as tables, chairs etc. can be
very dangerous.
WARNING! This child car seat is not designed
for long periods of sleep.
WARNING! Do not use the seat when the
child is able to sit up independently.
This child car seat is not a replacement for a
bed or cot. If children needs to sleep, they
should be moved to a bed or a cot.
Do not use the child seat if any of its parts
are broken or missing.

3.3 USE WITH THE STROLLER

The Oasys 0+ UP car chair seat can be used
with the LOVE, LOVEmotion, LOVE UP – Style-
Go, StyleGo UP.
WARNING! Please read the Stroller instruc-
tion manual when using the child car seat
on the stroller.
Before fastening the child car seat, remove
the stroller seat.
To install the child car seat on the stroller,
proceed as follows:
- Hold the child car seat by moving the carry
handle in vertical position (Fig.5-B) (Fig. 23).
- Fit inside the slots N the relevant devices
on the stroller (Fig. 24A - LOVEmotion UP,
Fig. 24B - StyleGo UP)
making sure the seat is engaged on both
sides. You will hear a CLICK when it is fas-
tened correctly.
WARNING: Before use, make sure that all the child
car seat fastening devices are correctly engaged.
To remove the child car seat from the stroller:
1. Put the carry handle into vertical position (B).
2. Pull first the rear release handle (Fig. 4 –
P) and then lift the child car seat by the
carry handle (Fig. 25A - LOVEmotion UP,
Fig. 25B - StyleGo UP).
3. Remove and place the child seat on a flat,
stable surface.
19