Coupling Tools In The Tool Chuck Adapter; Function Checks; Safe Operation - BBraun Aesculap Acculan 3Ti Gebrauchsanweisung

►
To unlock rotational speed control button 8: Turn
safety catch 9 to its ON position, see Fig. 11.
Rotational speed control button 8 is unlocked and
small drill 6 can be operated.
7
8
9
6
Fig. 11

Coupling tools in the tool chuck adapter

Note
The coupling of tools is described in instructions for use
TA011936.
4.2

Function checks

Note
The function checks must be carried out prior to each
surgical application of the unit and after each intraop-
erative battery change!
Note
Only use the device if it is in perfect condition.
►
Make certain that a battery has been installed.
►
Make certain that the attachment is securely
seated.
►
Check that the tool is seated properly.
►
Briefly run the small drill at maximum speed in
clockwise and counterclockwise mode.
►
Make certain that the rotational direction is cor-
rect in each case.
4.3

Safe operation

Risk of injury and/or malfunc-
tion!
►
WARNING
Risk of injury due to inadver-
tent activation of the motor
during coupling of an attach-
WARNING
ment/tool!
►
Risk of injury caused by aero-
sol formation or particles dur-
ing reaming, cutting or drill-
WARNING
ing!
►
Always carry out a func-
tion check prior to using
the product.
Secure motors that are not
actually used against inad-
vertent activation.
Always wear eye protection
when using the small drill.
11