Manual Operating Mode (Factory Setting) - Danfoss FH-CWP Gebrauchsanweisung

4. Manual Operating Mode
(factory setting)
Turn the thermostat ON or OFF by pressing
Fig. 1.
Selecting Manual Mode
Turn ON the thermostat by pressing
• Press M for 3 seconds - Fig.1.
• Select 01 = Manual Mode via
Setting the Clock Fig. 3
Su. Mo. Tu. We. Th. Fr. Sa.
• Press Fig. 1 shortly, hour will flash.
• Use
Fig. 1 again, minutes will flash.
• Press
• Use
Fig. 1 shortly, actual weekday will
• Press
flash.
• Use
Displaying the Room Temperature Fig. 3
• The actual room temperature is shown in the
display as default
8
VI.CU.C2.2D
Instruction FH-CWP Thermostat
Fig. 1 to select the hour.
Fig. 1 to select the minutes.
Fig. 1 to select the day of the week.
Produced by Danfoss Floor Heating Hydronics 05.2011
Fig. 1.
.
Fig. 1.