Panasonic PT-DZ870E Bedienungsanleitung Seite 154

Beispiel einer E-Mail, die bei einem Fehler gesendet wird
Die folgende E-Mail wird gesendet, wenn ein Fehler aufgetreten ist.
=== Panasonic projector report(ERROR) ===
Projector Type
Serial No
----- check system -----
MAIN CPU BUS
FAN
INTAKE AIR TEMPERATURE
OPTICS MODULE TEMPERATURE
AROUND LAMP TEMPERATURE
LAMP1 REMAIN TIME
LAMP2 REMAIN TIME
LAMP1 STATUS
LAMP2 STATUS
APERTURE(CONTRAST-SHUTTER)
SHUTTER(MUTE-SHUTTER)
INTAKE AIR TEMP.SENSOR
OPTICS MODULE TEMP.SENSOR
AROUND LAMP TEMP.SENSOR
BATTERY
COLOR WHEEL
LENS MOUNTER
COVER OPEN
BRIGHTNESS SENSOR
ANGLE SENSOR
AIR FILTER CASE
AIR FILTER
AC POWER
(Error code 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00)
Intake air temperature
Optics module temperature : 33 degC / 91 degF
Around lamp temperature
PROJECTOR RUNTIME
POWER ON
LAMP1 ON
LAMP1 ECO
LAMP1 NORMAL
LAMP1 REMAIN
LAMP2 ON
LAMP2 ECO
LAMP2 NORMAL
LAMP2 REMAIN
-------- Current status ---------
MAIN VERSION
SUB VERSION
LAMP STATUS
INPUT
REMOTE2 STATUS
----- Wired Network configuration -----
DHCP Client
IP address
MAC address
Mon Dec 03 15:39:36 2012
----- Memo -----
154 - DEUTSCH
Kapitel 4 Einstellungen — Menü [NETZWERK]
: DZ870
: SH1234567
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ FAILED ]
[ OK ]
[ OK ]
: 27 degC / 80 degF
: 30 degC / 86 degF
1 H
1 times
0 times
0 H
1 H
2999 H
1 times
0 H
1 H
2999 H
1.00
1.00
LAMP1=ON LAMP2=ON
RGB1 ---
0.00kHz / 0.00Hz
DISABLE
OFF
192.168.0.8
70:58:12:00:00:0