SICK PAC50 Bedienungsanleitung Seite 56

Operating Instructions
1
Figure 8: Switch panel mounting set
+ 3
40 0
Figure 9: Opening in the switch panel
5 4 O p e r a t i n g I n s t r u c t i o n s | S I C K
5 Installation/Mechanical connection
2
Insert the switch panel mounting frame into the switch panel from the
•
outside.
Secure the fixing element in the mounting rail support for the pressure
•
switch.
Insert the pressure switch into the switch panel mounting frame support
•
from behind until you can see and feel it lock into place.
Carefully tighten the two fixing screws as far as possible and secure the
•
fixing screws (4 Ncm) using the counter nuts.
4
3
8017612/YJ70/2015-02-24 | PAC50
Subject to change without notice
PAC50