Abus eyseo TV7230 Installationsanleitung Seite 269

fimage=<file name>[&return=<return page>]\r\n \r\n <multipart encoded form data>
Server will accept the upload file named <file name> to be upgraded the firmware and return with <return page> if
indicated.
IP filtering
Note: This request requires administrator access privilege Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/ipfilter.cgi?
method=<value>&[start=<ipaddress>&end=<ipaddress>][&index=<value>] [&return=<return page>]
PARAMETER VALUE
Method addallow
adddeny
deleteallow
deletedeny
start <ip address>
end <ip address>
index <value>
DESCRIPTION
Add a set of allow IP address range to server. Start and end
parameters must be specified. If the index parameter is specified, it
will try to add starting from index position.
Add a set of deny IP address range to server. Start and end
parameters must be specified. If the index parameter is specified, it
will try to add starting from index position.
Remove a set of allow IP address range from server. If start and
end parameters are specified, it will try to remove the matched IP
address. If index is specified, it will try to remove the address from
given index position. [start, end] parameters have higher priority
then the [index] parameter.
Remove a set of deny IP address range from server. If start and
end parameters are specified, it will try to remove the matched IP
address. If index is specified, it will try to remove the address from
given index position. [start, end] parameters have higher priority
then the [index] parameter.
The start IP address to add or to delete.
The end IP address to add or to delete.
The start position to add or to delete.
64