Customising The Tv Channels - Sony MFM-HT95 Bedienungsanleitung

Customising the TV channels

You can customise the TV channels using the "Manual
Programme Preset" menu.
1 Press the MENU button.
2 Press the M/m buttons to select
press the OK button.
The "Set Up" menu appears on the screen.
3 Press the M/m buttons to select "Manual
Programme Preset" and press the OK button.
The "Manual Programme Preset" menu appears on the screen.
4 Press the M/m buttons to select the desired item
and press the OK button.
Adjust the selected item according to the following
instructions.
x Presetting the channels
You can preset the channels, one by one, in the programme order
of your choice.
1 Press the M/m buttons to select "Programme" and
press the OK button.
2 Press the M/m buttons to select a programme
number for which you want to preset the channel
and press the OK button.
3 Press the M/m buttons to select "System" and
press the OK button.
4 Press the M/m buttons to select the TV broadcast
system and press the OK button.
• B/G:
• D/K:
• I:
• M:
5 Press the M/m buttons to select "Channel" and
press the OK button.
6 Press the M/m buttons to select the type of channel
to be tuned and press the OK button.
• S: Cable channels
• C:
Terrestrial channels
7 Press the 0–9 buttons to enter the channel number
of the TV broadcast directly and press the OK
button.
"Confirm" is selected automatically.
Tip
If you do not know the channel number of the TV broadcast, press the
M/m to search for it.
8 Press the OK button.
The "Confirm" menu appears on the screen.
9 Press the M/m buttons to select "OK" and press the
OK button.
The adjustment you have made for this channel is stored.
10 Repeat steps 1 to 9, if you want to preset another
channel.
11 Press the MENU button to exit the menu screen.
(Set Up) and
x Tuning the channels precisely
Normally the automatic fine tune (AFT) option will give the best
possible picture, however you can manually fine-tune the TV to
obtain a better picture if the picture is distorted.
1 Press the PROG +/– buttons to select the
programme number with the channel you want to
fine-tune manually.
Note
You cannot select the programme number set to skip using the "Skip"
menu.
2 Press the M/m buttons to select "AFT" and press
the OK button.
3 Press the M/m buttons to tune the channel precisely
between –15 and +15 and press the OK button.
"Confirm" is selected automatically.
4 Press the OK button.
The "Confirm" menu appears on the screen.
5 Press the M/m buttons to select "OK" and press the
OK button.
The adjustment you have made for this channel is stored.
6 Repeat steps 1 to 5 if you want to tune another
channel.
7 Press the MENU button to exit the menu screen.
To restore automatic fine tuning
Select "On" in step 3 above.
x Skipping unnecessary channels
You can skip unnecessary channels when selecting channels
using the PROG +/– buttons.
1 Press the M/m buttons to select "Programme" and
press the OK button.
2 Press the M/m buttons to select a programme
number which you want to skip and press the OK
button.
3 Press the M/m buttons to select "Skip" and press
the OK button.
The "Skip" menu appears on the screen.
4 Press the M/m buttons to select "Yes" and press the
OK button.
"Confirm" is selected automatically.
GB
15