Entering Recipe Names - Leister TWINNY T7 Bedienungsanleitung

Selecting a recipe
• Choosing the "Select freely definable and predefined recipes" icon in the function display (28) takes you to
the "Select Recipes" menu.
• Use the "Up" and "Down" (22/23) keys to position the cursor on the desired recipe and press "e-Drive" (27)
to confirm.
• If, during operation, you change setpoints in recipes you have created, the setpoints will not be saved in the
recipe. When the device is restarted, the values saved in the recipe will be displayed again.
• If you wish to apply the most recently used setpoints when you restart the device, you have to select the
preprogrammed "BASIC" recipe.
• The currently selected recipe is displayed in the status display "Section 1" (30). An exception to this is the
"BASIC" recipe; if this is selected, only the line voltage is displayed in the status display (30).

6.3 Entering recipe names

In keyboard mode, you can define names with a maximum of 12 characters.
Keyboard mode
28
48
Character selection (32)
Up (22)
Vertical character selection
Down (23)
Rotate
Horizontal character selection
"e-Drive" (27)
Press "e-Drive"
Confirm the selected characters
(27)
32
33
Change between upper and lower case
Move the cursor position to enter the name
Insert a blank space
Delete one character (the character to the left of the cursor)
Select this symbol to switch to the
function display (28)
Symbol selection (33)
Horizontal symbol selection
Confirm the selected symbols