Hilti UD 4 Bedienungsanleitung Seite 22

3 Description
3.1 Product overview
3.2 Intended use
The product described is an electric drill. It is designed for drilling in steel, wood and plastic and for driving
and removing screws.
3.3 Items supplied
Electric drill, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group | USA: www.hilti.com
4 Technical data
4.1 Drill
For details of the rated voltage, frequency, current and input power, please refer to the power tool's
country-specific type identification plate.
When powered by a generator or transformer, the generator or transformer's power output must be twice
the rated power shown on the rating plate of the power tool. The operating voltage of the transformer or
generator must always be within +5% and -15% of the rated voltage of the power tool.
Weight
Protection class
4.1.1 Using extension cords
WARNING
A damaged supply cord presents a hazard! Do not touch the supply cord or extension cord if damaged
while working. Disconnect the supply cord plug from the power outlet.
▶ Check the appliance's supply cord at regular intervals and have it replaced by a qualified specialist if
found to be damaged.
• Use only extension cords of a type approved for the application and with conductors of adequate gauge
(cross section). The power tool may otherwise suffer a drop in performance and the extension cord may
overheat.
18 English
Printed: 26.03.2018 | Doc-Nr: PUB / 5367014 / 000 / 04
1
Chuck
@
Belt hook
;
Grip
=
Lockbutton for sustained operation
%
Supply cord
&
Control switch
(
Forward/reverse switch
)
UD 4
1.35 kg
(2.98 lb)
II
2180560
*2180560*