Ec Declaration Of Conformity - Beko DRYPOINT M PLUS series Installation Und Betriebsanleitung

EN | FR | PT Instructions for installation and operation | Instructions de montage et de service | Instruções de instalação e de operação
BEKO TECHNOLOGIES GMBH
Im Taubental 7
41468 Neuss, GERMANY
Phone: +49 2131 988-0
www.beko-technologies.de
We hereby declare that the products indicated hereafter comply with the stipulations of the relevant
directives and technical standards. This declaration only refers to products in the condition in which they
have been placed into circulation. Parts which have not been installed by the manufacturer and/or
modifications which have been implemented subsequently remain unconsidered.
Product designation:
Models:
Supply voltage versions:
Max. operating pressure:
Product description and function:
Low Voltage Directive 2006/95/EC
Applied standards:
Application of CE mark:
RoHS II Directive 2011/65/EU
The products meet the requirements laid down in European Directive 2011/65/EU concerning the restriction
of the use of certain hazardous substances in electrical and electronic devices.
Neuss, 22/07/2015
DRYPOINT DM 10-34 C-N, DM 10-41 C-N, DM 10-47 C-N, DM 20-48 C-N, DM 20-53 C-N, DM 20-60 C-N, DM 20-67 C-N,
DM 40-61 C-N, DM 40-75 C-N, DM 40-90 C-N

EC Declaration of Conformity

DRYPOINT M
DM10...V21, DM20...V21, DM40...V21
24VDC, 24VAC, 110VAC, 230VAC
16bar @ +2 up to +70°C (DM10 ...V21 and
DM20...V21)
16bar @ +2 up to +60°C (DM40...V21)
Membrane dryer for compressed air pressure dew point
lowering with purge air switch
EN 61010-1:2010, EN50178:1997, EN 60664-1:2007,
EN 60204-1:2006
15
BEKO TECHNOLOGIES GAMBOL
ppa Christian Lieder
Head of Quality Management
37