Timer Function; Position During Use - FLORABEST HG02064 Bedienungs- Und Sicherheitshinweise

Timer function

I f you have reached the cooking temperature,
are not satisfied and wish to continue cooking
you can use the receiver's
P ress the "Mode" button
timer function. The LC display
to the timer function as depicted in the following
illustration.
S elect the desired time by pressing the "Min / +"
button
6
the button for a longer period of time, the time
will be set faster.
P ress the "Taste / Start" button
countdown. The LC display
remaining time.
P ress the "Meat / Stop" button
the countdown if you wish to check on the food.
P ress the "Taste / Start" button
countdown.
W hen the countdown has ended, the LC display
will flash red and a continuous acoustic signal will
sound.
P ress the "Meat / Stop" button
alarm. If you do not press the button to turn off
the alarm, it will turn itself off automatically after
about 2 minutes.
P ressing and holding the „Meat / Stop" button
deletes the set countdown time.
7
Tip: The timer function will not turn off if you press
the "Mode" button
selection display.

Position during use

There are many positions for the receiver
transmitter
13
Receiver
1
You can place the receiver
Using the fastening clips
beside the stove in a visible location or attach it to
1
your clothes (belt, trouser pocket, shirt pocket or apron
pocket).
The fastening clip
the receiver
or the "Sec / –" button
4
while the product is in use:
position
9
contains two magnets to attach
9
to a magnetic surface.
1
timer function.
1
once to activate the
4
will now change
2
5
to begin the
3
will display the
2
to interrupt
7
to continue the
3
to stop the
7
to return to the function
on the transmitter
1
you can place the receiver
. If you press
2
and
1
.
13
GB 15