Operation; Switching On/Off And Adjusting Temperature; Switching Off Automatically - Silvercrest SHGB 50 A1 Bedienungsanleitung

5. Operation

DANGER! - Fire hazard!
Never cover the device or place it on
soft objects (e.g. towels). As long as the
device is switched on and/or hot, al-
ways place it on a stable, flat, heat-re-
sistant surface.
DANGER! Risk of injury
through burning!
Never touch the hot brush insert with
ceramic coating 6.
NOTE:
• Before using it for the first time, switch
the device on for a few minutes and set
it to the highest temperature (180 °C).
As a result of the manufacturing pro-
cess, you may notice a slight odour.
This is normal and only occurs during
first use. Ensure that the room is well
ventilated.
5.1 Switching on/off and
adjusting temperature
1. Place the device on a heat-resistant sur-
face.
2. Connect the mains plug 1 to a properly
installed and easily accessible wall
socket whose voltage corresponds to
the specifications on the rating plate.
The wall socket must continue to be eas-
ily accessible after the device is
plugged in.
3. Press the on/off button
prox. 2 seconds to switch the device
on. The display 5 shows 150.
4. Use the +/– 4 buttons to set the desired
temperature between 100 °C and
180 °C in 10 °C steps. LED segments
moving clockwise in the display 5 will
indicate that the device is heating up.
6
GB
NOTE: LED segments running anticlockwise
indicate that the device is cooling down.
Wait until the desired temperature appears
in the display before straightening your hair.
5. In order to avoid changing the tempera-
ture by accidentally pressing the
+/- 4 buttons, you can lock these but-
tons.
- Press one of the +/- 4 buttons for ap-
prox. 2 seconds. The buttons are now
locked. The display 5 shows
- Press one of the +/- 4 buttons again
for approx. 2 seconds. The buttons
are now unlocked. The display 5
stops showing
6. Press the on/off button
prox. 2 seconds to switch the device
off.
7. Allow the device to cool down on the
heat-resistant surface.

Switching off automatically

If you do not press a button on the switched-
on device for 45 minutes, it will switch off
automatically. Before this happens, the tem-
perature display will flash in the display 5.
Press the on/off button
seconds to switch the device back on.
3 for ap-
.
.
3 for ap-
3 for approx. 2