Removal From The Isofix Platform; Use On A Stroller - KIDDY evo-luna i-size Bedienungsanleitung

ENG
The green display's at the front and side of the slide indicates whether the
seat is locked securely (Fig. 15). If the green display's are not visible this
means that your kiddy evo-lunafix i-Size has not been properly fastened to
the platform!
Now you can decide whether you want to use your seat in the seated
position (Fig. 16; No. 1) or in reclined position (Fig. 16; No. 2). Simply adjust
the position with the carry handle (see point 5.1).
The final step involves pushing the releasing slide (at the side of the knee)
back (Fig. 17; No. 1) and securely sliding the carriage at the padding of the
vehicle seat's backrest (Fig. 17; No. 2). Now let the releasing slide go. The
next locking position can be found by moving the carriage.
The carriage must be securely locked and if this is the case, the green
display will become visible (Fig. 17; No. 3).

7.1.3 Removal from the Isofix platform

To remove your kiddy evo-lunafix i-Size from the Isofix platform, keep the
release handle for the infant carrier, which can be found above the front
cover, pulled (Fig. 18; A) and lift the infant carrier from the Isofix platform
(Fig. 18; B).
Your Isofix platform is also equipped with a mechanism to release the infant
carrier. If you pull the releasing handle at the front of the carriage (Fig. 19;
No. 1), you can remove the seat in an upward movement (Fig. 19; No. 2).

8. Use on a stroller

Ensure that the respective adapters (Kiddy art. no. 46-200-MC-000 & 46-
300-MC-000) are properly mounted to the stroller.
Now place the infant carrier on the adapters with the head-end in the
direction of travel (Fig. 20; No. 1). Check that everything is locked into place.
9