Verathon GlideScope Go Bedienungs- Und Wartungshandbuch Seite 32

Table 10. Guidance and Manufacturer's Declaration —Electromagnetic Immunity
The system is intended for use in the electromagnetic environment specified below. The customer or the
user of the system should ensure that it is used in such an environment.
Immunity Tests
Conducted
RF: conducted
immunity on all
ports
IEC 61000‑4‑6
Conducted
RF: conducted
immunity on
patient coupling
ports
IEC 61000‑4‑6
26
0900‑4788 REV‑07
IEC 60601 Test Level
3 Vrms at 0.15 MHz–80
MHz AC/DC/Signal lines
6 Vrms at ISM bands
between 0.15 MHz–80
MHz
3 Vrms at 0.15 MHz–80
MHz and 480.0498 kHz
6 Vrms at ISM Band, 3
sec dwell time
Compliance Electromagnetic Environment –
Level
Portable and mobile RF
communications equipment should
be used no closer to any part of the
system, including cables, than the
recommended separation distance
calculated from the equation
In compliance
applicable to the frequency of the
transmitter.
Recommended separation
distance d (m)
d=1.2 √P
Guidance