Reolink Argus Eco Schnellstartanleitung Seite 5

Setup Camera on Reolink Client (For PC)
Please download the client software from our official website:
https://reolink.com/software-and-manual and install it.
Note: The camera must be first set up on Reolink App before being connected to Reolink Client.
Launch the Reolink Client software and manually add the camera to the Client. Please follow the steps
below.
• In LAN
1. Click "Add Device" on the right-side
menu.
2. Click "Scan Device in LAN".
3. Double click on the camera you
want to add. The information will be
filled in automatically.
4. Input the password created on
Reolink App to log in.
5. Click "OK" to log in.
6 English
• In WAN
1. Click "Add Device" on the right-side menu. 4. Create a name for the camera displayed on Reolink
Client.
2. Choose "UID" as the Register Mode.
5. Input the password created on Reolink App to log in.
3. Type in the UID of your camera.
6. Click "OK" to log in.
Note: To save power, the
camera will log out if no
operation is conducted for
about five minute. You
must login again by
clicking the " " btton.
English 7