DES-3326 Layer 3 Fast Ethernet Switch User's Guide
In this case, 6 IP interfaces are required, so a CIDR notation of 10.32.0.0/11 (or a 11-bit) addressing
scheme
will
work.
11111111.11100000.00000000.00000000 (binary) or 255.224.0.0 (decimal).
Using a 10.xxx.xxx.xxx IP address notation, the above example would give 6 network addresses and 6
subnets.
Any IP address from the allowed range of IP addresses for each subnet can be chosen as an IP address
for an IP interface on the switch.
For this example, we have chosen the next IP address above the network address for the IP interface's
IP Address:
The 6 IP interfaces, each with an IP address (listed in the table above), and a subnet mask of
255.224.0.0 can be entered into the Setup IP Interface menu.
To setup IP Interfaces on the switch:
Highlight Layer 3 IP Networking from the Main Menu and press Enter.
Highlight Layer 3 IP Networking from the Main Menu and press Enter.
Table 6-3. VLAN Example – Assigned Ports
This
addressing
VLAN Name
VID
System (default)
1
Engineer
2
Marketing
3
Finance
4
Sales
5
Backbone
6
Table 6-4. VLAN Example – Assigned IP Interfaces
Figure 6-35. Layer 3 - Main Menu
scheme
will
give
Network Number
10.32.0.0
10.32.0.1
10.64.0.0
10.64.0.1
10.96.0.0
10.96.0.1
10.128.0.0
10.128.0.1
10.160.0.0
10.160.0.1
10.192.0.0
10.192.0.1
119
a
subnet
IP Address
mask
of